Suzhou Delfino Environmental Technology Co., Ltd.
Digital conductivity sensors have two electrodes and four electrodes. Compared with analog conductivity sensors, digital conductivity sensors have higher accuracy and stability through digital measurement and signal processing technology. They provide accurate measurements and reduce errors due to sensor drift or interference. Digital conductivity sensors usually have a digital output interface, such as a serial communication interface (such as RS485, MODBUS, etc.) or a digital bus (such as I2C, SPI, etc.). This allows for easy connection and communication of the sensor with other devices or data acquisition systems. Daruifuno's digital conductivity sensors have built-in temperature compensation and are capable of temperature compensation
The industrial online pH ORP controller APX1-C1Z developed and produced by Delfino is a cheap instrument that meets the rich output needs of customers. It has a 0/4-20mA current output and a two-wire RS485 communication interface, supports the Modbus communication protocol, and can meet the needs of customers with different output data. 2 multifunctional relays can control pH dosing, sensor cleaning and temperature control. The protection level of the online pH meter is IP66, which is...
The pH ORP controller is a device used to automatically adjust the pH of a liquid. It is very important in the process control of water quality analysis. First, it can improve production efficiency and product quality. In many industrial processes, pH control is critical. By using a pH controller, it can be ensured that the pH value of the liquid during the production process is always kept within the predetermined range, thereby reducing waste and loss during the production process. Second, pH...
A pH sensor is a sensor used to measure the pH of a solution, and its principle is based on electrochemical reactions. An analog pH sensor usually consists of a glass electrode and a reference electrode. The inside of the glass electrode is coated with a glass membrane that reacts with hydrogen ions in the solution to generate a potential difference to measure the pH of the solution. This ASP300 online pH sensor is a combination electrode with double salt bridge design, long service life and...
The online conductivity analyzer is an instrument used to monitor and adjust the conductivity of water quality. The AEC1-T conductivity controller developed and produced by Daruifuno can meet most water treatment applications. Drinking water treatment, industrial water treatment, inline conductivity meter with 2 relays, can automatically adjust chemical additives or other steps to keep the conductivity value of water quality within a certain range. In the wastewater treatment industry, inline...
The inline pH sensor is an important instrument used to measure the pH of a solution, and its service life is affected by many factors, including frequency of use, environmental conditions, sample properties, etc. Generally speaking, the service life of the pH electrode is between 6 months and 2 years, but the specific situation needs to be determined according to the actual usage. Choosing a good durable pH sensor requires consideration of many factors, including measurement range, response...
An industrial pH sensor is an electrochemical sensor used to measure the pH of a solution, which plays a very important role in industrial processes. The PH value is an index to measure the acidity and alkalinity of a solution. For many industrial processes, controlling the PH value is very critical. The following are the importance of industrial pH electrodes in industrial processes: Control the reaction process: In many industrial processes, the change of pH value will affect the reaction...
Ozone O3 is a molecule composed of three oxygen atoms and is a strong oxidizing agent. It is produced in nature by means such as ultraviolet radiation and electric shock discharge, and is commonly found in the ozone layer in the atmosphere. The advantage of ozone as a disinfectant is that it can quickly kill bacteria, viruses and other microorganisms, and is more efficient than traditional disinfectants. During the disinfection process, no harmful residue is left, and it will not cause...
Chlorine dioxide can be used to disinfect and purify water sources. It is usually used in the water treatment industry, and in the tap water industry, monitoring chlorine dioxide is very important. Usually, before the raw water from the waterworks enters the treatment system, it is necessary to monitor the chlorine dioxide in the raw water to know whether there is chlorine dioxide pollution in the raw water. In the process of water treatment, the concentration of chlorine dioxide also needs to...
Chlorine dioxide (ClO2) is a colorless gas with a pungent odor. It is produced by the reaction of chlorine and oxygen under certain conditions. Chlorine dioxide has strong oxidizing and bactericidal properties, so it is widely used in many occasions. Monitoring water quality for chlorine dioxide levels can assess whether the concentration of disinfectant is high enough to achieve effective disinfection. Delfino's chlorine dioxide sensor is designed for continuous monitoring of water quality...
Chlorine is one of the common water treatment agents used to disinfect tap water from bacteria and pathogens. Monitoring the total chlorine value at the waterworks can ensure that the concentration of chlorine disinfectants in the tap water is within a safe range, which can effectively kill bacteria and pathogens without adversely affecting human health. In addition, monitoring the total chlorine value can also detect leakage or excessive dosage of chlorine disinfectant in tap water in time to...
Peracetic acid is a strong oxidant that can quickly kill microorganisms such as bacteria, viruses and fungi in water, and plays an important role in water quality safety. Peracetic acid will be decomposed into water and oxygen after being used in water, without leaving any harmful substances, and has no pollution to the environment. It can effectively inhibit the reproduction of microorganisms in water, extend the shelf life of water, and prevent water from deteriorating. Peracetic acid can be...
Total chlorine refers to the sum of free chlorine and combined chlorine in water, which is an indicator used to measure the content of chlorine in water. Residual chlorine refers to the content of chlorine that is not consumed after adding disinfectant to water. It is the residue of a disinfectant used to keep water sanitizing. The sensors used to measure the residual chlorine value and total chlorine value of water are different. Daruifuno's total chlorine sensor CP4.0 is specially designed...
Chlorine is a common disinfectant used to kill bacteria, viruses and other microorganisms in water. Monitoring the total chlorine level can ensure that the chlorine concentration in the water is within the safe range to effectively disinfect the water source. Chlorine can react with organic matter to produce carcinogens such as chloroform. Monitoring total chlorine levels can help identify excessive chlorine concentrations in water and avoid potential health risks. Chlorine can also react with...
Fluoride ions are negatively charged ions formed when a fluorine atom loses an electron. Fluoride ions play an important role in living organisms, such as combining with calcium ions in teeth and bones to form calcium fluoride, which helps prevent dental caries and osteoporosis. In addition, fluoride ion is also widely used in industrial production, medicine and agriculture and other fields. In some industrial production processes, such as aluminum smelting, fluoride such as sodium fluoride and...
OWA030, OWA350, OWA361 oil in water sensor, using the principle of ultraviolet fluorescence analysis, compared with several commonly used methods, the fluorescence method is more efficient, quicker and has better repeatability, and can be monitored in real time online. The sensor has better repeatability and stability to detect soluble and emulsified oils. In addition, OWA361 is equipped with an automatic cleaning brush, which can eliminate air bubbles and reduce the impact of contamination on...
The fluorine ion F- refers to the negatively charged ion formed by the loss of an electron from the fluorine atom. Fluoride ions play important roles in chemistry and biology, such as playing a key role in tooth protection and bone formation. In different industries, it is also necessary to monitor the concentration of fluoride ions in water quality. Fluoride ion is an important indicator in drinking water. High concentration of fluoride ion is harmful to human health. Therefore, it is...
Pool turbidity monitoring is very important as it ensures the quality and cleanliness of the pool water. Turbidity in pool water refers to the concentration of suspended and dissolved matter in the water, which includes dirt, sweat, grease, chemicals, and more. If the turbidity of swimming pool water is too high, it will not only affect the sight of swimmers, but also may lead to health problems such as infectious diseases and allergies. The turbidity value of swimming pool water usually needs...
Chloride ions are common water treatment agents used for disinfection and sterilization. During water treatment, chloride ions can kill bacteria, viruses and other microorganisms, thus ensuring the safety of drinking water. However, high concentrations of chloride ions may have a negative impact on human health. High concentrations of chloride ions may interact with organic matter to produce carcinogens and have adverse effects on human liver and kidneys. High concentrations of chloride ions...
The online digital pH sensor developed and produced by Daruifuno is a sensor for online pH monitoring of water quality. Digital electrodes have higher measurement accuracy, can provide accurate pH measurement results, and output them in real time. The difference between digital sensors and analog pH sensor is mainly here that digital sensors can directly provide real-time digital output without using additional conversion devices. This is due to its internal RS485 interface, which supports...
The digital pH sensor is an instrument used to measure the pH of water or other liquids. Its principle is based on the change of the acid-base indicator to measure the pH of the liquid. The pH sensor changes the color of the indicator by contacting the liquid with an acid-base indicator, and then measures the concentration of hydrogen ions (H+) in the liquid through an electrode to determine the pH of the liquid. The working principle of the pH sensor is relatively simple, but it is very...
Model NO.: WCY2029 Type of Company: Manufacturer Trademark: WCY
Model NO.: WCY-2029P OEM: Available Trademark: WCY
Model NO.: WCY-2029P Product Properties: Sensor Resolution: 10us / Cm
Model NO.: KS-A1040H08CTR Output Signal Type: Digital Type Sensitivity: Medium
Products Description
Model NO.: WCY2029 Type of Company: Manufacturer Trademark: WCY
Model NO.: WCY-2029P OEM: Available Trademark: WCY
The optical dissolved oxygen sensor is more and more favored by various industries because it does not need electrode liquid, does not consume oxygen, and has the characteristics of plug and play. So in which applications do you need a dissolved...
About Us
Related Products List
Contact Us
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
