Suzhou Delfino Environmental Technology Co., Ltd.
The scattering method turbidity sensor is a common type of turbidity analyzer sensor. The working principle of the scattering method turbidity sensor is relatively simple. It evaluates the turbidity of the liquid by measuring the scattering of light in the liquid. Scattering occurs when light passes through suspended solids or particles, so the intensity of the scattered light can be used to infer the level of turbidity. Scattering turbidity sensors are usually characterized by fast response and can provide accurate turbidity measurements in a short time. This is important for applications that require real-time monitoring and control of turbidity. Online turbidity sensor can be applied to a wide range of turbidity, from weak scattering to highly turbid liquids can be measured
The APX1-C1 online pH ORP Controller is an intelligent water analysis instrument. It is the most basic configuration and cost-effective instrument developed and produced by Delfino. The function of the controller is not only to measure pH or ORP value, but also to realize the output of data, it has a current output of 0/4-20mA. In addition, the pH analyzer is capable of controlling dosing with two configurable relays. This pH orp controller is powered by a wide voltage, 100~240V or 18~36Vto...
A pH sensor is a sensor used to measure the pH of a solution, and its principle is based on electrochemical reactions. An analog pH sensor usually consists of a glass electrode and a reference electrode. The inside of the glass electrode is coated with a glass membrane that reacts with hydrogen ions in the solution to generate a potential difference to measure the pH of the solution. This ASP300 online pH sensor is a combination electrode with double salt bridge design, long service life and...
ORP is the abbreviation of Oxidation-Reduction Potential, also known as Redox Potential. It is a physical quantity that measures the intensity and direction of redox reactions in solution. The principle of the ORP probe is to use electrode to measure the potential of the oxidation-reduction reaction in the solution. The redox probes are usually made of materials such as silver/silver chloride or platinum/platinum black. When the electrode comes into contact with a redox agent in solution, an...
The online conductivity analyzer is an instrument used to monitor and adjust the conductivity of water quality. The AEC1-T conductivity controller developed and produced by Daruifuno can meet most water treatment applications. Drinking water treatment, industrial water treatment, inline conductivity meter with 2 relays, can automatically adjust chemical additives or other steps to keep the conductivity value of water quality within a certain range. In the wastewater treatment industry, inline...
The inline pH sensor is an important instrument used to measure the pH of a solution, and its service life is affected by many factors, including frequency of use, environmental conditions, sample properties, etc. Generally speaking, the service life of the pH electrode is between 6 months and 2 years, but the specific situation needs to be determined according to the actual usage. Choosing a good durable pH sensor requires consideration of many factors, including measurement range, response...
How to choose a durable, high-precision inline pH probe? Buyers are concerned about the following aspects when purchasing a pH electrode: first, the accuracy and stability of the electrode, which needs to ensure the accuracy and repeatability of the measurement results; second, the scope of application of the electrode, which needs to be based on actual needs Select the appropriate electrode type and measurement range; the third is the price and cost performance of the electrode, you need to...
An industrial pH sensor is an electrochemical sensor used to measure the pH of a solution, which plays a very important role in industrial processes. The PH value is an index to measure the acidity and alkalinity of a solution. For many industrial processes, controlling the PH value is very critical. The following are the importance of industrial pH electrodes in industrial processes: Control the reaction process: In many industrial processes, the change of pH value will affect the reaction...
Daruifuno's online ammonia nitrogen controller is a digital instrument. It can be connected with the digital ammonia nitrogen sensor of the ion selection method to realize real-time monitoring of the ammonia nitrogen value of the water quality. The ammonia controller is widely used in water treatment plants, sewage plants, industrial production processes, etc., where ammonia nitrogen content needs to be monitored. The ammonia controller has two SPST relays for control system and clean control....
Sewage plants need to control the value of ammonia nitrogen, mainly to protect the environment and human health. The discharge of sewage with high ammonia nitrogen content into the natural environment will lead to problems such as eutrophication of water body and excessive algae reproduction, which will seriously affect the survival of aquatic organisms and the stability of water quality. At the same time, sewage with high ammonia nitrogen content will also pose a threat to human health. For...
Ozone O3 is a molecule composed of three oxygen atoms and is a strong oxidizing agent. It is produced in nature by means such as ultraviolet radiation and electric shock discharge, and is commonly found in the ozone layer in the atmosphere. The advantage of ozone as a disinfectant is that it can quickly kill bacteria, viruses and other microorganisms, and is more efficient than traditional disinfectants. During the disinfection process, no harmful residue is left, and it will not cause...
Chlorine dioxide can be used to disinfect and purify water sources. It is usually used in the water treatment industry, and in the tap water industry, monitoring chlorine dioxide is very important. Usually, before the raw water from the waterworks enters the treatment system, it is necessary to monitor the chlorine dioxide in the raw water to know whether there is chlorine dioxide pollution in the raw water. In the process of water treatment, the concentration of chlorine dioxide also needs to...
Chlorine dioxide (ClO2) is a colorless gas with a pungent odor. It is produced by the reaction of chlorine and oxygen under certain conditions. Chlorine dioxide has strong oxidizing and bactericidal properties, so it is widely used in many occasions. Monitoring water quality for chlorine dioxide levels can assess whether the concentration of disinfectant is high enough to achieve effective disinfection. Delfino's chlorine dioxide sensor is designed for continuous monitoring of water quality...
Chlorine is one of the common water treatment agents used to disinfect tap water from bacteria and pathogens. Monitoring the total chlorine value at the waterworks can ensure that the concentration of chlorine disinfectants in the tap water is within a safe range, which can effectively kill bacteria and pathogens without adversely affecting human health. In addition, monitoring the total chlorine value can also detect leakage or excessive dosage of chlorine disinfectant in tap water in time to...
Peracetic acid is a strong oxidant that can quickly kill microorganisms such as bacteria, viruses and fungi in water, and plays an important role in water quality safety. Peracetic acid will be decomposed into water and oxygen after being used in water, without leaving any harmful substances, and has no pollution to the environment. It can effectively inhibit the reproduction of microorganisms in water, extend the shelf life of water, and prevent water from deteriorating. Peracetic acid can be...
Total chlorine refers to the sum of free chlorine and combined chlorine in water, which is an indicator used to measure the content of chlorine in water. Residual chlorine refers to the content of chlorine that is not consumed after adding disinfectant to water. It is the residue of a disinfectant used to keep water sanitizing. The sensors used to measure the residual chlorine value and total chlorine value of water are different. Daruifuno's total chlorine sensor CP4.0 is specially designed...
Chlorine is a common disinfectant used to kill bacteria, viruses and other microorganisms in water. Monitoring the total chlorine level can ensure that the chlorine concentration in the water is within the safe range to effectively disinfect the water source. Chlorine can react with organic matter to produce carcinogens such as chloroform. Monitoring total chlorine levels can help identify excessive chlorine concentrations in water and avoid potential health risks. Chlorine can also react with...
Hydrogen peroxide is a chemical substance with the chemical formula H2O2, a colorless, tasteless, odorless liquid with strong oxidizing properties. Hydrogen peroxide is widely used in water disinfectants because it can effectively kill germs, viruses and other microorganisms in water, thus making water safer and more hygienic. The disinfecting action of hydrogen peroxide is achieved through its oxidizing properties. Hydrogen peroxide can react with organic substances and microorganisms in water...
The DUC2-TU turbidity controller can be connected with the turbidity sensor developed by Daruifuno using the principle of infrared scattering to measure the concentration of suspended substances in water, and then convert the measurement results into electrical signals for processing and monitoring. The role of the sewage plant turbidity transmitter is to monitor and control the turbidity in the sewage treatment process to ensure that the turbidity of the effluent meets the specified standards....
The drinking water industry has strict requirements on turbidity values. Turbidity refers to the ability of suspended particulate matter in water to scatter light, and is an index to measure the clarity of water quality. According to the standards of the World Health Organization (WHO), the turbidity of drinking water should be as low as possible, and generally should not exceed 1 NTU (turbidity unit). In some countries and regions, such as the United States and the European Union, the...
This digital infrared turbidity analyzer adopts the 90° near-infrared light scattering principle and conforms to the ISO7027 standard to measure the turbidity of water samples. DUC2-TU turbidity controller can be connected with the digital turbidity sensor to measure the water turbidity values. The controller has two relays and two 4-20mA current output. As a digital turbidity controller, it has RS485 interface and support Modbus protocol. Features Of Turbidity Controller ● Compatible with all...
Ultrasonic Sea Water Level Sensor Wiring Diagram Packaging & Shipping
Specifications Electronic water level sensor 1.To the metery,you aer the word 2.Accuracy:0.25~0.5%F.S 3.RS485 Optional Product Description Name: Electronic water level sensor
Specifications Magnetic water level sensor 1.Accuracy:0.25~0.5%FS 2.RS485 Optional 3.To metery you are the word ackaging & Shipping Packaging Det
Specifications Pool water level sensor 1.Accuracy:0.25~0.5%FS 2.RS485 Optional 3.To metery you are the word ackaging & Shipping Packaging Detail:
Specifications Stainless steel water level sensor 1.To the metery,you aer the word 2.Accuracy:0.25~0.5%F.S 3.RS485 Optional Product Description Name: Stainless steel water level sensor
Ultrasonic Sea Water Level Sensor Wiring Diagram Packaging & Shipping
Specifications Electronic water level sensor 1.To the metery,you aer the word 2.Accuracy:0.25~0.5%F.S 3.RS485 Optional Product Description Name: Electronic water level sensor
The optical dissolved oxygen sensor is more and more favored by various industries because it does not need electrode liquid, does not consume oxygen, and has the characteristics of plug and play. So in which applications do you need a dissolved...
About Us
Related Products List
Contact Us
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
