Suzhou Delfino Environmental Technology Co., Ltd.
The online dissolved oxygen sensor of the optical method uses the fluorescence method to measure the dissolved oxygen content in water. The dissolved oxygen probe uses advanced optical technology to achieve high-precision dissolved oxygen measurement. The response speed is fast, and it can monitor the change of oxygen in water in real time. The optical dissolved oxygen sensor has high stability and can work stably for a long time. The protection level is IP68, and it can work continuously underwater. The maintenance and calibration of the dissolved oxygen sensor is relatively simple. The optical method does not require electrolyte and routine maintenance. The service life of the fluorescent cap is about 1 year, and the reliability is high
The industrial online pH ORP controller APX1-C1Z developed and produced by Delfino is a cheap instrument that meets the rich output needs of customers. It has a 0/4-20mA current output and a two-wire RS485 communication interface, supports the Modbus communication protocol, and can meet the needs of customers with different output data. 2 multifunctional relays can control pH dosing, sensor cleaning and temperature control. The protection level of the online pH meter is IP66, which is...
The pH ORP controller is a device used to automatically adjust the pH of a liquid. It is very important in the process control of water quality analysis. First, it can improve production efficiency and product quality. In many industrial processes, pH control is critical. By using a pH controller, it can be ensured that the pH value of the liquid during the production process is always kept within the predetermined range, thereby reducing waste and loss during the production process. Second, pH...
A pH sensor is a sensor used to measure the pH of a solution, and its principle is based on electrochemical reactions. An analog pH sensor usually consists of a glass electrode and a reference electrode. The inside of the glass electrode is coated with a glass membrane that reacts with hydrogen ions in the solution to generate a potential difference to measure the pH of the solution. This ASP300 online pH sensor is a combination electrode with double salt bridge design, long service life and...
ORP is the abbreviation of Oxidation-Reduction Potential, also known as Redox Potential. It is a physical quantity that measures the intensity and direction of redox reactions in solution. The principle of the ORP probe is to use electrode to measure the potential of the oxidation-reduction reaction in the solution. The redox probes are usually made of materials such as silver/silver chloride or platinum/platinum black. When the electrode comes into contact with a redox agent in solution, an...
The inline pH sensor is an important instrument used to measure the pH of a solution, and its service life is affected by many factors, including frequency of use, environmental conditions, sample properties, etc. Generally speaking, the service life of the pH electrode is between 6 months and 2 years, but the specific situation needs to be determined according to the actual usage. Choosing a good durable pH sensor requires consideration of many factors, including measurement range, response...
An industrial pH sensor is an electrochemical sensor used to measure the pH of a solution, which plays a very important role in industrial processes. The PH value is an index to measure the acidity and alkalinity of a solution. For many industrial processes, controlling the PH value is very critical. The following are the importance of industrial pH electrodes in industrial processes: Control the reaction process: In many industrial processes, the change of pH value will affect the reaction...
Ammonia nitrogen refers to the total nitrogen content of ammonia and amino compounds in water. In the process of sewage treatment, ammonia nitrogen is a very important indicator, because it can reflect the degree of decomposition of organic matter and the content of nitrogen in sewage. Therefore, sewage plants need to monitor the value of ammonia nitrogen to ensure the quality and effect of sewage treatment. In the sewage treatment process, the monitoring of ammonia nitrogen is mainly...
Ammonia nitrogen is an important water quality parameter that needs to be monitored in the aquaculture industry. Daruifuno's DUC2-NH online ammonia nitrogen controller can be connected with the ammonia sensor to realize real-time online continuous monitoring of the ammonia nitrogen value of the water quality. This ammonia controller has 2 SPST relay outputs, two 4-20mA current outputs and RS485 communication. The ammonia controller can control the cleaning of the ammonia sensor in water. For...
Ozone O3 is a molecule composed of three oxygen atoms and is a strong oxidizing agent. It is produced in nature by means such as ultraviolet radiation and electric shock discharge, and is commonly found in the ozone layer in the atmosphere. The advantage of ozone as a disinfectant is that it can quickly kill bacteria, viruses and other microorganisms, and is more efficient than traditional disinfectants. During the disinfection process, no harmful residue is left, and it will not cause...
Chlorine dioxide can be used to disinfect and purify water sources. It is usually used in the water treatment industry, and in the tap water industry, monitoring chlorine dioxide is very important. Usually, before the raw water from the waterworks enters the treatment system, it is necessary to monitor the chlorine dioxide in the raw water to know whether there is chlorine dioxide pollution in the raw water. In the process of water treatment, the concentration of chlorine dioxide also needs to...
Chlorine dioxide (ClO2) is a colorless gas with a pungent odor. It is produced by the reaction of chlorine and oxygen under certain conditions. Chlorine dioxide has strong oxidizing and bactericidal properties, so it is widely used in many occasions. Monitoring water quality for chlorine dioxide levels can assess whether the concentration of disinfectant is high enough to achieve effective disinfection. Delfino's chlorine dioxide sensor is designed for continuous monitoring of water quality...
Chlorine is one of the common water treatment agents used to disinfect tap water from bacteria and pathogens. Monitoring the total chlorine value at the waterworks can ensure that the concentration of chlorine disinfectants in the tap water is within a safe range, which can effectively kill bacteria and pathogens without adversely affecting human health. In addition, monitoring the total chlorine value can also detect leakage or excessive dosage of chlorine disinfectant in tap water in time to...
Peracetic acid is a strong oxidant that can quickly kill microorganisms such as bacteria, viruses and fungi in water, and plays an important role in water quality safety. Peracetic acid will be decomposed into water and oxygen after being used in water, without leaving any harmful substances, and has no pollution to the environment. It can effectively inhibit the reproduction of microorganisms in water, extend the shelf life of water, and prevent water from deteriorating. Peracetic acid can be...
Total chlorine refers to the sum of free chlorine and combined chlorine in water, which is an indicator used to measure the content of chlorine in water. Residual chlorine refers to the content of chlorine that is not consumed after adding disinfectant to water. It is the residue of a disinfectant used to keep water sanitizing. The sensors used to measure the residual chlorine value and total chlorine value of water are different. Daruifuno's total chlorine sensor CP4.0 is specially designed...
Chlorine is a common disinfectant used to kill bacteria, viruses and other microorganisms in water. Monitoring the total chlorine level can ensure that the chlorine concentration in the water is within the safe range to effectively disinfect the water source. Chlorine can react with organic matter to produce carcinogens such as chloroform. Monitoring total chlorine levels can help identify excessive chlorine concentrations in water and avoid potential health risks. Chlorine can also react with...
The DUC2-TU turbidity controller can be connected with the turbidity sensor developed by Daruifuno using the principle of infrared scattering to measure the concentration of suspended substances in water, and then convert the measurement results into electrical signals for processing and monitoring. The role of the sewage plant turbidity transmitter is to monitor and control the turbidity in the sewage treatment process to ensure that the turbidity of the effluent meets the specified standards....
The drinking water industry has strict requirements on turbidity values. Turbidity refers to the ability of suspended particulate matter in water to scatter light, and is an index to measure the clarity of water quality. According to the standards of the World Health Organization (WHO), the turbidity of drinking water should be as low as possible, and generally should not exceed 1 NTU (turbidity unit). In some countries and regions, such as the United States and the European Union, the...
This digital infrared turbidity analyzer adopts the 90° near-infrared light scattering principle and conforms to the ISO7027 standard to measure the turbidity of water samples. DUC2-TU turbidity controller can be connected with the digital turbidity sensor to measure the water turbidity values. The controller has two relays and two 4-20mA current output. As a digital turbidity controller, it has RS485 interface and support Modbus protocol. Features Of Turbidity Controller ● Compatible with all...
Turbidity refers to the content of suspended matter in water, usually expressed by the number or concentration of particulate matter in water. These particles can be organic matter, inorganic matter, microorganisms, etc. suspended in water, or sediment, silt, etc. in water. Turbidity is an important indicator of water quality, which can reflect the content of impurities in water and the transparency of water, and is one of the important parameters in water quality monitoring. Monitoring the...
The content of suspended solids in water quality is one of the important indicators for evaluating water bodies. Suspended solids sensors are usually used with a suspended solids controller. Widely used in solid suspension control in industrial production process, such as water treatment, waste water treatment, ore flotation and other processes. By controlling the concentration and particle size of suspended solids, product quality can be improved, waste emissions can be reduced, and the...
Model NO.: WCY2028 Type of Company: Manufacturer Trademark: Weichengya
Products Description
Products Description
Products Description
Products Description
Model NO.: WCY2028 Type of Company: Manufacturer Trademark: Weichengya
Products Description
The optical dissolved oxygen sensor is more and more favored by various industries because it does not need electrode liquid, does not consume oxygen, and has the characteristics of plug and play. So in which applications do you need a dissolved...
About Us
Related Products List
Contact Us
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
